Which Embedded Webserver is available in which device?


For CITREX H3, the wired Embedded Webserver Configuration is available for configuring the user interface of the device. Connect the CITREX H3 via ethernet cable to a PC and enter the IP address generated by the CITREX H3 device in a web browser.

For CITREX H4, the wired Embedded Webserver Configuration & Monitoring is available for configuring the user interface and for monitoring of real-time charts and parameters of the device. Connect the CITREX H4 via ethernet cable to a PC and enter the IP address generated by the CITREX H4 in a web browser.

For CITREX H5, the wired Embedded Webserver Monitoring is available for monitoring of real-time curves and parameters of the device. Connect the CITREX H5 via ethernet cable to a PC and enter the IP address generated by the CITREX H5 in a web browser. There is a second Embedded Webserver available in the CITREX H5 that connects via WLAN to a web browser. This Embedded Webserver of CITREX H5 provides the following features:

  • Monitoring of measured values from the CITREX H5, even over long distances
  • Monitoring and resetting of statistical values
  • Export of measured values as a CSV file (data snapshot)
  • Display and download of saved test reports (in PDF and CSV formats) from the CITREX H5.

 

How to connect to the Embedded Webserver of the CITREX H5 via WLAN:

  1. Open the Settings menu, select Wi-Fi, and ensure Wi-Fi is enabled. Select your preferred Wi-Fi network and select Connect (if your network is secured via password, a pop-up will appear where you can enter it). The CITREX H5 automatically detects a free IP address in the WLAN via DHCP (Dynamic Host Configuration Protocol).
  2. Start a web browser and enter the detected IP address. The web browser automatically connects to the Embedded Webserver of the CITREX H5.

War dieser Artikel hilfreich?

Es tut uns leid. Was können wir besser machen?